Upload USMT software from Media Manager

You can upload and install the USMT software version 5.0 from the latest version of the Media Manager.

1.	On the device where the KACE Media Manager is installed, run the Media Manager from Start > All Programs > Quest > KACE Media Manager.

2.	In Media Manager, in the left pane, click General Settings.

NOTE: This page appears by default if this is the first time you run the Media Manager.

3.	In SDA Hostname, enter the IP address of the appliance.

4.	In SDA IP address, enter the IP address segments of the appliance.

5.	In Samba Share Password, enter the password you used to log in.

6.	Click Upload USMT.

7.	Click Browse and confirm that the path to the appropriate Windows ADK is correct.

For example:

◦	WinPE 10 Win10 x86 ADK C:\Program Files\Windows Kits\10

◦	WinPE 10 Win8 x64 ADK C:\Program Files(x86)\Windows Kits\10

8.	Click Start Upload.